( We also sell our own branded USB Floppy Disk Drive Emulators with more features than a standard Gotek: www.simulant.uk/shop/retro-computers-games-consoles/Gotek-Floppy-Disk-Drive-Emulators/Floppy-Disk-Drive-USB-Emulator-OpenFlops-FlashFloppy-%20Gotek-upgrade )

OLED Display GOTEK Floppy disc / floppy disk drive USB emulator DOS / IBM / MAC / PC / XT / 286 / 386 / 486 etc etc. Fits any computer with standard sized 3.5" floppy drive and can replace existing disk drive or be added as a second drive.

Update your retro computer with fast loading and the facility to store all of your disks on one USB drive and quickly press the buttons to switch disks for faster loading and saving.

Also helps preserve any of your original floppy disks as you can copy them to USB or download thousands of other software titles online and run those on your machine.

A great way to also transfer software from your PC via USB flash drive to your retro or older computer (this could even be used in a new computer's 3.5" enclosure/bay)!

This is the latest Gotek floppy emulator for retro computers with 3.5" floppy disk drive bay, or for use externally or in a caddy. This will also work with almost any computers. You just need the correct floppy IDE or Ribbon connection cables. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs), some machines may need extra leads/connectors to connect to the standard 34 pins), please check your device.

Flashed with current latest FlashFloppy firmware (https://github.com/keirf/FlashFloppy) and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.

These are also great for use as a second drive or fitting in an external enclosure such as with Commodore, Amiga, Atari, Amstrad, Sinclair, Acorn / BBC, Mac etc.

INCLUDES:

- Gotek usb floppy pcb board (already fitted in the case).

- 3.5" Case/enclosure with wider display area for OLED display.

- 3 Screws for fitting to your computer.

---

Directly supports a wide range of disk/disc image formats:
ADF (Commodore Amiga)
ADM, ADL, ADF, DSD, SSD (Acorn DFS and ADFS)
DSK (Amstrad CPC, Spectrum +3)
IMG, IMA, DSK (IBM MFM Raw Sector)
OPD (Spectrum Opus Discovery)
SDU (SAB Diskette Utility)
ST (Atari ST)
TRD (Spectrum TR-DOS)
V9T9, DSK (TI-99/4A)
HFE, HFEv3 (Universal)
Pre-configured track layouts for Raw Sector Images:
Akai (S01, S20, S950)
Ensoniq (ASR, TS, etc)
General Music (S2, S3, S2R)
Memotech
IBM PC and many others

On installation disconnect any 12v power for your floppy from your computer and make sure to only use 5v power lines as this drive is 5v only. Using more than 5v will blow this unit!

NOTE: Gotek drives usually come with the smaller LED 3-digit display but we have modified the case so the larger OLED display fits and we include this instead to create an upgraded product. See photos for layout/buttons/connectors. No returns accepted or warranty due to nature of these devices mainly being used with old retro hardware which if faulty could cause the drive to fail.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Gotek 3.5" OLED Display Floppy Disk Drive emulator - IBM PC XT Mac DOS etc (with Flash Floppy firmware)

Product Code: 3.5" Gotek Drive with OLED Display
Availability: Out Of Stock

£33.99

Available Options

Floppy Emulator Drive / Gotek Addons

NO EXTRAS

Rotary Encoder fitted (Knob for disk select) (+£8.00)

Piezo Speaker fitted (for Floppy Drive sounds) (+£6.00)

Qty

0 reviews / Write a review