Atari 1024 and Atari 1040 ST / STF / STE Gotek Bracket and fitting kit. Fits the slanted style drive bay (see photos).

Fitting a gotek usb drive to your Atari can be a little tricky. The standard gotek cases don't fit well, and the Atari's internal wiring is not long enough to connect the USB drive properly so that the case can go back correctly.

This kit allows you to fit a Gotek drive to your Atari ST computer with ease - and looks much better than trying to get a standard gotek case to fit inside! No modifications to your Atari or Atari ST case are needed.

This product listing is ONLY for the bracket and fitting kit.

Contents:

White plastic 3d printed bracket to fit Atari 1024 / 1040 / ST / STF / STE
(Will NOT fit 520STe/SF314 straight style drives or Mega STE).
Longer jumper wires for LCD display to reach properly
Internal floppy power lead extension and tie wrap
Internal floppy data ribbon extension cable

The Gotek usb drive is NOT included. We do sell Gotek USB Floppy Disk Emulator drives separately, please add it to your order if required.

Other photos show how this fits and looks when finished.

Important Notes:

1. When fitting make sure your power extension lead is plugged with the red wire into 5v (NOT 12v or it will damage your Gotek). Once happy secure with provided tie-wrap (see photo).

2. Add the data ribbon cable extension inverted, so there is a twist in the cable. Gotek drives have their plug the opposite way up to Atari floppy drives. If when testing the Gotek gives a "rib" error it just means you need to turn your data ribbon cable plug the other way around.

3. Depending on your Atari model, you may have to use a sharp knife or small drill bit to widen one of the bracket fitting holes which has the supporting "peg" underneath inside your Atari to get a perfect snug fit. We have made this hole a little small as they can vary and it means you can get a nice firm fit.

---

Atari ST gotek 3d printed bracket is based on Creative Commons Thingiverse design by PlanC here: https://www.thingiverse.com/thing:2531272

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Atari 1024 / 1040 ST Gotek floppy disk emulator fitting kit (includes Bracket, Data & Power extensions & longer LCD jumpers)

Product Code: atari-st-gotek-fitting-kit
Availability: Out Of Stock

£27.99

Qty

0 reviews / Write a review

Write a review

Atari 1024 / 1040 ST Gotek floppy disk emulator fitting kit (includes Bracket, Data & Power extensions & longer LCD jumpers)

£27.99

Related Products

Acorn Amstrad Amiga Apple Atari Spectrum DOS / IBM XT PC MSX GOTEK Floppy disc / disk drive USB emulator

32GB Micro Mini Flash Drive USB Memory Stick Pen Backup Drive PC / Mac / Linux / Gotek

Atari 520STe / ST Gotek floppy disk emulator mounting Bracket (straight drive type)

Gotek OLED Flash Floppy Compatible LCD Display 0.91" 128x32 (White Text) 3.3v 5v

Gotek LCD 3-Digit LED Flash Floppy Compatible Display 4 pins